
This development of the standard Starlock Push-on Fastener ® is particularly useful for applications where the face of the fastener must be square to the axis of the shaft. This is achieved by the self aligning legs on the fastener which also give increased resistance to non-axial loads which may be transmitted from the adjacent part i.e. wheel to axle assembly.
All dimensions shown are in inches unless otherwise stated and are approximate only.
A |
|
B |
C |
|
|
Type of Cap |
|||
Shaft |
Part No. |
Outside |
Material |
Part No. |
Size of |
Dome |
Axle |
Deep |
Nylon |
3/16 |
7112 |
.450 - 11.5 |
.010 |
7253 |
2 |
SK |
SK |
A |
|
5mm |
7121 |
.450 - 11.5 |
.010 |
7257 |
2 |
SK |
SK |
A |
|
6mm |
7122 |
.600 - 15.2 |
.012 |
7258 |
3 |
SK |
SK |
A |
N |
1/4 |
7118 |
.600 - 15.2 |
.012 |
7254 |
3 |
SK |
SK |
A |
N |
5/16 |
7125 |
.600 - 15.2 |
.012 |
7255 |
3 |
SK |
SK |
A |
N |
8mm |
7123 |
.600 - 15.2 |
.012 |
7259 |
3 |
SK |
SK |
A |
N |
3/8 |
7119 |
.725 - 18.4 |
.012 |
7256 |
4 |
SK |
SK |
A |
N |
10mm |
7124 |
.725 - 18.4 |
.012 |
7260 |
4 |
SK |
SK |
A |
N |
22.1mm |
8185 |
1.173 - 29.8 |
.016 |
|
|
|
|
|
|
Only available in spring steel.
Uncapped fasteners can be supplied in blue and varnish finish for imperial BV sizes , in bronze and varnish finish for metric BV sizes or in mechanical zinc plated DT finish.